Taurus HM664IXD PYRO, Instructions For Use Manual, Page: 32 / 140

EN - 9
2. INSTALLATION AND PREPARATION FOR USE
WARNING : This appliance must be installed by an authorised service person or
qualified technician, according to the instructions in this guide and in compliance with
the current local regulations.
• Incorrect installation may cause harm and damage, for which the manufacturer accepts
no responsibility and the warranty will not be valid.
• Prior to installation, ensure that the local distribution conditions (electricity voltage
and frequency) and the adjustments of the appliance are compatible. The adjustment
conditions for this appliance are stated on the label.
• The laws, ordinances, directives and standards in force in the country of use are to be
followed (safety regulations, proper recycling in accordance with the regulations, etc.).
• If the product contains removable shelf guides (wire racks) and the user manual
includes recipes like yoghurt, the wire racks shall be removed and the oven operated
in the defined cooking mode. Removal of the Wire Shelf information is included in the
CLEANING AND MAINTENANCE section.
2.1 inStruCtionS for the inStaller
General instructions
• After removing the packaging material from the appliance and its accessories, ensure
that the appliance is not damaged. If you suspect any damage, do not use it and
contact an authorised service person or qualified technician immediately.
• Make sure that there are no flammable or combustible materials in the close vicinity,
such as curtains, oil, cloth etc. which may catch fire.
• The worktop and furniture surrounding the appliance must be made of materials
resistant to temperatures above 100°C.
• The appliance should not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer.
2.2 inStallation of the oven
The appliances are supplied with installation kits and can be installed in a worktop with the
appropriate dimensions. The dimensions for hob and oven installation are given below.
A (mm) 557 min./max. F (mm) 560/580
B (mm) 550 min. G (mm) 555
C (mm) 595 min. H/I (mm) 600/590
D (mm) 575 min. J/K (mm) 5/10
E (mm)
576