Taurus Elite Smith Machine, Assembly Instructions Manual

Page: 16 / 34

4 Barbell set 1
8 Protecting rack 2
18 Rod fi xing ring 4
22 Rubber bushing 4
26 Protective mats 4
27 Rubber bumper 2
46 Hex socket head cap screw M6*20 8
51 Spring washer M6 8
54 Plain washer
φ16*φ8.4*1.6
12
58 Nut M8 6
61
Left barbell rack
1
62
Right barbell rack
1
63 Left Sliding Frame 1
64 Right Sliding Frame 1
65 Hex socket head cap screw M8*30 6
66 Spring washer M8 6
16
Smith Machine
Step 3: Assembly of the Guide Rods and Barbell Set

NOTICE
The guide rods are pre-assembled.
1. Slightly loosen the screws (44) and nuts (58) at the top of the left and right barbell racks (61 &
62).
2. Loosen the screws (46) and spring washers (51) at the bottom of the left and right barbell racks
(61 & 62).
3. Tilt up the left and right barbell racks (61 & 62).
4. Mount the barbell set (4) to the left and right barbell racks (5 & 6) along with two rubber bushing
(22), two protection mats (26), two protecting racks (8) and two rubber bumpers (27).
5. Remount the barbell racks (5 & 6) with the previously loosened screws (44 & 46), spring washers
(51) and nuts (58).
No. Name Specifi cation Qty.