Taurus EASY PRESS 1000 LEGEND, Instructions For Use Manual

Page: 6 / 44

English (Original instructions)
EN
CITRUS JUICER
EASY PRESS 1000 LEGEND
DESCRIPTION
A Press cone cover
B Big cone
C Small cone
D Stainless steel filter
E Pulp adjuster filter
F Housing
G Lever
H
Juice deposit
I Anti-drip valve
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE
• Fully unroll the appliance’s power cable before each use.
• Do not use the appliance if its accessories are not
properly fitted.
• Do not move the appliance while in use.
• Do not use the appliance if it is tipped up, and do not turn
it over.
• Do not turn the appliance over while it is in use or
connected to the mains.
• Store this appliance out of the reach of children and/or
those with reduced physical, sensory or mental abilities or
those unfamiliar with its use
• Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability null
and void.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all the product’s packaging has been
removed.
• Please read the “Safety advice and warnings” booklet
carefully before first use.
• Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the cleaning section.
USE
• Unroll the cable completely before plugging it in.
• Connect the appliance to the mains.
• Cut the citrus fruits to be squeezed in half.
• Place a glass under the anti-drip valve.
• NOTE: The anti-drip valve can be opened or closed as
required. (Fig. 1).
• Turn on the appliance by pushing down with the pressing
handle on the piece of citrus fruit once it has been placed
on the juicing cone.
• To stop the appliance, simply stop applying pressure to
the cone.
• Remove the cone and strainer assembly in order to empty
the jar.
• NOTE: If you process large quantities of fruit, you will
need to clean the filter and remove the residual pulp on a
regular basis.
• NOTE: The larger cone is for larger citrus fruits, such as
oranges, and you can press down with the lever. The
smaller cone is for small citrus, such as lemon, and you
need to press your hand directly onto the cone.
PULP REGULATION FILTER
This juicer includes a filter that allows you to adjust the pulp
to your liking. To use this filter, you must follow these steps:
• Remove the stainless steel filter.
• Place the plastic pulp regulation filter correctly.
• Adjust the regulator to the right for less pulp and to the left
for more. (Fig. 2).
• NOTE: The pulp filter is composed of two pieces. It can
be disassembled, to make the cleaning process easier.
To reassemble it must be taken into account that the
regulator must be between the two limiting walls and exert
pressure between the two pieces.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
• Clean the appliance.
CLEANING
• Disconnect the appliance from the mains before
undertaking any cleaning task.
• Clean the motor base with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Never submerge the motor base in water or any other
liquid or place it under running water.