Taurus Dual Pro Leg Press/ Calf Ext, Assembly And Operating Instructions Manual

Page: 15 / 44

001 Frame 1
027 Hexagon socket countersunk head screws M12*30 4
032 Flat washer Φ24*Φ13*2.5 4
033-1 Spring washer M12 4
33-2 Main Frame 1
34-2 Joint Frame 1
74 Plain washer Φ24*Φ13*2.5 4
75 Spring washer M12 4
76 Hex socket head cap screw M12*30 4
No. Name Specification Qty.
15
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of Main Frame and Joint Frame
1. Assemble the joint frame (34-2) to the frame (001) by using four screws
(027), four spring washers (033-1) and four flat washers (032).
2. Assemble the joint frame (34-2) to the main frame (33-2) by using four
screws (76), four spring washers (75) and four plain washers (74).