Taurus CVTM2517, Assembly And Operating Instructions Manual, Page: 17 / 52

 
17
Step 5: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by
turning the two setting screws under the main frame.
1. Lift the treadmill on the desired side and rotate the
setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them
and to raise the running surface.
3. Rotate them counterclockwise in order to lower the
running surface.
Step 6: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.
Step 7: Using the holder for mobile devices
1. Place your mobile device onto the holder (C) above the console (84).
2. Pull out the fixing hook (A) that is located on the back of the console cover and fix it at the top
of your device.
L
NOTICE
The scope of delivery contains a buffer strap. This can optional be stuck between your device
and the console cover if there is knocking sound during workout. The buffer strap has to be
stuck onto the top of the console cover.