Taurus CHTA500, Manual

Page: 8 / 48

-Press during few seconds to confirm day
setting and enter the clock hour setting, with
the screen display: .
-Press + and
-
to set the current hour
-Press during few seconds to confirm hour
setting and enter the minute setting, with the
screen display: .
-Press
+
and
-
to set the current minute
-Press to confirm all settings
-Note: The clock and calendar will be reset to
factory default if without power supply.
HEATING MODE:
-Press M to enter mode selection. By pressing
M
,heating mode runs in a continuous cycle
as below:
- Comfort mode: Press
+
and
-
to set
the temperature from 5-35°C.
- ECO mode: Press
+
and
-
to set the
temperature from 1-31°C.
-Note: ECO mode=Comfort mode - 4°C
-Anti-frost mode: the screen display . The
target temperature is 7°C. The temperature
can’t be adjusted.
-P1/P2/P3: Pre-set heating program.
-Note: If the clock and day setting are not finis-
hed, the first time to enter P1/P2/P3 program
setting, it is requested to set day and clock
setting in advance.
P1: (Monday-Sunday) unadjustable program
P2:(Monday-Friday) unadjustable program
P2:(Saturday-Sunday) unadjustable program
P3:(Monday-Friday) Adjustable program
P3:(Saturday-Sunday) Adjustable program
P3 adjustable program setting
-1. When under P3 mode, press
M
over 3 secs
to enter day setting.
-2. The screen displays , press
+
and
-
to
set from (Monday-Sunday). Press
M
to
confirm and enter hour setting
-3. The screen displays , press
+
and
-
to set from 00-24). Press
M
to choose heating
mode for every hour (Comfort mode or ECO
mode or anti-frost mode for no indicators
on)
-4. Repeat the operation until you have comple-
ted the schedule of every hour and every day.
-Note: After setting heating mode for hour 23,
press
+
to come back to day setting.
-Note: when screen displays , press
+
finish all setting with display of .
TIMER OFF FUNCTION
-Press one time, the screen display “OH”
and keeps flashing. press
+
and
-
to set
timer from 0-24 hours. Press again to con-
firm setting, then the indicator light is on.
OPEN WINDOW FUNCTION
-Press one time and the indicator light
is on. If open window function is activated, the
indicator light keeps flashing and stops
heating.
-Press again to quit open window function
and back to previous working situation.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
-Turn the appliance off using the on/off button.
-Unplug the appliance from the mains.
-Clean the appliance.
-Safety thermal protector: