Taurus B990, Assembly And Operating Instructions Manual

Page: 14 / 32

14
B990-CURL
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of the Stand
1. Attach two bushings (6) to the main frame (1).
2. Attach three foot covers (7) to the main frame (1).
Step 2: Assembly of the Curl Pult Attachment
Assemble the arm pad (3) to the arm pad support (2) by using two bolts (20) and two washers (21).
Step 3: Assembly of the Leg Extension Module
1. Insert two foam tubes (8) into the leg extension (5).
2. Attach four foam rollers (11) to the foam tubes (8).
3. Attach four foam caps (12) to the foam rollers (11).
4. Assemble the rubber pad (19) to the lower part of the leg extension (5) by using one bolt (18).
5. Attach the round plug (9) and plate adapter (10) to the leg extension (5).
6. Assemble the adjustable support (4) to the leg extension (5) by using one bolt (15), two washers
(16) and one lock nut (17).
7. Attach three plugs (13) to the leg extension (5).
8. Attach the safety hook (14) to the leg extension (5).