Taurus B940, Assembly And Operating Instructions Manual, Page: 12 / 28

12
B940
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
1.
Step 2: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the
main frame.
1. Lift the treadmill on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the running surface.
3. Rotate them counterclockwise in order to lower the running surface.