Taurus ALPATEC TUAREG 1500, Manual

Page: 12 / 92

not turn it over.
-Do not turn the appliance over while it is in use
or connected to the mains.
-If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains
when it is not in use, even if it is only for a short
while, as proximity to water involves a risk, even
if the appliance is disconnected.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-This appliance is for household use only, not
professional, industrial use.
-Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowled-
ge.
-Do not store the appliance if it is still hot.
-Do not store or transport the appliance if it is
still hot.
-Do not store the appliance on areas where the
temperature could be lower than 2ºC.
-Do not expose the appliance to extreme tempe-
ratures.
-Never leave the appliance unattended while in
use.
-Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
-Do not use the appliance to dry pets or animals.
-Do not use the appliance to dry textiles of any
kind.
-CAUTION: User can’t sleep when appliance is
under use; there is a risk of injuries.
- If, for some reason, the oil were to catch fire,
disconnect the appliance from the mains and
smother the fire using the lid, a cover or a large
kitchen cloth. NEVER WITH WATER.
-Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
- CAUTION: There is a risk of fire if the
appliance’s cleaning is not done according to
these instructions.
-Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer’s liability null and void.
DESCRIPTION
A Carrying handle
B Thermostat switch
C Power I switch
D Power II switch
E Cord housing
F Front leg
G Wheels
H Wheels holding plate
I Humidifier
J Temperature desired
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
ASSEMBLING THE BASE:
-To assemble the base, place the appliance face
down.
- Position the base if the appliance body fitting
the flange into the holes on the front of the
underside of the appliance (Fig. 1)
-Fix the base to the front base of the appliance
using a screw (Fig. 1)
-Stand the appliance up again so as to check the
base works properly.
ASSEMBLING THE WHEELS:
-To assemble the wheels, place the appliance
face down.
- Fit the flanges of the back of base of the wheel
holding plate and fix to the appliance using a
screw (Fig. 2).
-Next, remove the screws from the rods and put
them into the holes in the wheel holding plate
base.
- Fix the rods into position with screws (Fig. 2)
-Insert the wheels into the ends of the rods until
they are well adjusted.
-Stand the appliance up again so as to check
that the wheels work properly.
INSTRUCTIONS FOR USE
BEFORE USE:
-Make sure that all products’ packaging has
been removed.
- To eliminate the smell given off by the appliance
when used for the first time, it is recommended
to have it on at full power for 2 hours in a well-
ventilated room.
USE:
-Take the length of cable required out of the
housing.
-Connect the appliance to the mains.