Taurus ABDOMINAL IT95, Owner'S Manual

Page: 19 / 35

19
Assembly
STEP 4
1. Attach one 4.5" Pulleys (#10) to the Weight Stack Frame ASSY (#1) using:
one M10*50 SHCS (#117) two Φ11*Φ20*2 Flat Washer (#126)
one M10 Nylon Lock Nut (#128)
2. Attach two Circular Foot Frame ASSY (#8) to the Seat Pad Frame ASSY (#2) using:
four M10*70 SHCS (#116) four Φ11*Φ20*2 Flat Washer (#126)
3. Attach the Sleeve (#12) and the Torsion Spring (#13) to the Swing Frame ASSY (#6),
then attach the Swing Frame ASSY (#6) to the Wheel Frame ASSY (#5) using:
one Locking ring (#110) one Location ring (#111)
one Cap Φ60 (#106) one Circle Ring Φ62.5*5 (#107)
one M10*25 SHCS (#119)
Note: 1. Wrench tighten bolts and Nylon Lock Nuts.
2. Pay attention to the direction of the Sleeve (#12) and Torsion Spring
(#13).
3. Make the long end of the Torsion Spring (#13) insert the hole on the
tube of the Swing Frame ASSY (#6).
4. Make the short end of the Torsion Spring (#13) next to the stick on the
Wheel Frame ASSY (#5).