Taurus 925013000, Manual

Page: 13 / 48

English
MULTI-FUNCTION FOOD
PROCESSOR
FOODIE
DESCRIPTION
A Measuring beaker
B Lid
C Lid seal
D Blade
E Blade seal
F Jug
G Blade tensioner
H Mixing paddle
I Central unit
J Digital screen
K Control panel
L Blade guard
M Steamer lid
N Steamer middle tray
O Steamer tray
P Spatula
Q Strainer basket
R On/Off button
CONTROL PANEL
1 Speed/Temperature indicator
2 Temperature setting
3 Speed setting
4 Time setting
5 Scales function
6 Heat function
7 Pulse function
8 Knead function
9 PLAY / PAUSE
10Selector knob
11Weight/Time indicator
USE AND CARE:
-Unroll the appliance’s power cable fully before
each use.
-Do not use the appliance if its accessories are
not properly fitted.
-Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
-Do not use the appliance when the jug is
empty.
-Do not use the appliance if the ON/OFF switch
does not work.
-Do not move the appliance while it is in use.
-Do not tip the appliance over while it is in use
or connected to the mains.
-Do not exceed the appliance’s work capacity.
-The blades are sharp and there is a risk of
being cut. Handle with caution and avoid direct
contact with their edges.
-Do not exceed the jug’s MAX level (2 litres)
-Do not touch the container when preparing hot
food (above 60 ºC).
-If the temperature of the container exceeds 60
°C, the speed automatically reduces to level 4,
assuming it is running at a higher speed.
-Store this appliance out of reach of children
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with
its use
-Do not put the appliance away if it is still hot.
-Keep the appliance in good condition. Check
that the moving parts are not misaligned or lo-
cked and make sure there are no broken parts
or problems that may prevent the appliance
from operating correctly.
-To ensure correct operation, keep the base of
the jug, its locating pins, and the connectors on
the central unit clean.
-Always use this appliance, its accessories and
tools in accordance with these instructions,
taking into account the work conditions and
the work to be done. Never use the appliance
for purposes other than those for which it is
intended, as this could be dangerous.
-Periodically check the state of the lid seal.
-Check that the lid is closed properly before
switching on the appliance.
-Do not open the lid while the liquid contained
inside the container is boiling.
-Be careful when pouring hot liquids into the
container, as they may splash back due to a
sudden emission of steam.
-Exercise caution after the appliance stops, as
the blades continue to rotate due to mechanical
inertia.
-Do not use the spatula if the blades are still
spinning.