AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: BT-CD 18/1 Li ,
10/11
7
the working conditions and the work to be
performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
a.
Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the safety
of the power tool is maintained.
6. Recommendation
We recommend that the tool always be supplied via
residual curtrent device with a rated residual current of
30 mA or less.
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Keep this manual in a safe place, so that
the information is available at all times. If you give
the equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
2. Layout (Fig. 1)
1.
Torque selector
2.
Forward / Reverse switch
3.
ON/OFF switch
4.
Battery pack
5.
Pushlock button
6.
Selector switch for 1st gear or 2nd gear
7.
Keyless chuck
8.
Charging adapter
9.
Battery charger
10. Battery capacity indicator
11. Switch for battery capacity indicator
12. LED light
3. Proper use
The tool is designed for tightening and undoing screws,
as well as for drilling in wood, metal and plastic.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage supply
18 V d.c.
Idling speed
0-350/0-1200 rpm
Torque settings
19 + 1
Forward and reverse rotation
yes
Chuck capacity
max. 10 mm
Battery charging voltage
22.7 V d.c.
Battery charging current
380 mA
Mains voltage for charger
230 - 240 V ~ 50 Hz
Weight
1.7 kg
Max. screw diameter
6 mm
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
72 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
83 dB(A)
K
WA
uncertainty
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Drilling in metal.
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 1.5 m/s
2
Screwing without hammer action
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 1.5 m/s
2
Additional information for power tools.
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specified value in exceptional
circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
