![background image](http://html1.mh-extra.com/html/taurus/1170/1170_assembly-and-operating-instructions-manual_3759816011.webp)
25
25
29
29
30
31
2
11
Design Line
Weight Bench
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Mounting the feet
1. Mount the rear and front base (7 & 8) to the left and right frame (1 & 2) using four bolts (15), four
arc washer (29), four nylon nuts (30) each.
2. Tighten the screws tightly.
3. Place a nylon cap (31) on each of the nylon nuts (30).