industrial use.
-
This symbol means that
product can’t be covered.
-CAUTION: In order to prevent
overheating do not cover the
appliance.
-Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.
-Connect the appliance to a base with an earth
socket withstanding a minimum of 16 amperes.
-The appliance’s plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
-Use the appliance in a well-ventilated area.
-If other gas or fuel appliances can be used at
the same time in the room where the appliance
is to be used, that room must be well ventilated.
-Do not place the appliance where it can reach
the sunlight.
-The appliance must only be used with the stand
provided.
-Place the appliance on a horizontal, flat, stable
surface, suitable for withstanding high tempera-
tures and away from other heat sources and
contact with water.
-Keep the appliance away from flammable mate-
rial such as textiles, cardboard or paper, etc.
-Do not place inflammable material near the
appliance.
-Ensure that neither the air access nor exit
become either totally or partially covered by
drapery, clothing, etc., as this increases the risk
of fire.
-Do not use the appliance in association with a
programmer, timer or other device that automat-
ically switches it on.
-Do not use the appliance if the cable or plug is
damaged.
-If any of the appliance casings breaks, immedi-
ately disconnect the appliance from the mains to
prevent the possibility of an electric shock.
-CAUTION: Maintain the appliance dry.
-CAUTION: Do not use the appliance near water.
-Do not use the appliance with damp hands or
feet, or when barefooted.
-Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appli-
ance.
-Do not wrap the power cord around the appli-
ance.
-Do not clip or crease the power cord.
-Do not allow the power cord to come into con-
tact with the appliance’s hot surfaces.
-Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
-The appliance is not suitable for outdoor use.
-Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
-As an additional protection to the electrical
supply for the appliance, it is advisable to have
a differential current device with a maximum
sensitivity of 30 mA. Ask for advice from a com-
petent installer.
-Do not use or store the appliance outdoors.
-Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the appli-
ance, this will increase the risk of electric shock.
-Do not touch the plug with wet hands.
-Do not use the appliance in the case of persons
insensitive to heat (the appliance has heated
surfaces).
-Do not touch the heated parts of the appliance,
as it may cause serious burns.
-The temperature of the accessible surfaces may
be high when the appliance is in use.
USE AND CARE:
-Fully unroll the appliance’s power cable before
each use.
-Do not use the appliance if the on/off switch
does not work.
-Do not use the appliance if it is tipped up and do
not turn it over.
-Do not turn the appliance over while it is in use
or connected to the mains.
-If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains
when it is not in use, even if it is only for a short
while, as proximity to water involves a risk, even
if the appliance is disconnected.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
-Do not store the appliance in a vertical position.
-Do not store the appliance if it is still hot.
Summary of Contents for MALBORK 1200
Page 3: ...E 1 MODE PROG C B D E IV XII III XI I II IX VIII X XIII XIV VI VII V 2 3 5 4 A ...
Page 4: ...Fig 1 F G G ...
Page 104: ......