Taurus Alpatec FRESKO FOREST 3B, Instructions For Use Manual

Page: 8 / 48

English (Original instructions)
EN
CEILING FAN
FRESKO FOREST 3B
FRESKO PURE 3B
DESCRIPTION
A Ceiling bracket
B Body
C
Long / Short suspension tube
D Lamp cover
E LED light
F Remote control receiver
G Blades
H
Remote control
I Remote control support
REMOTE CONTROL
1
Speed selector (1/2/3/4/5/6)
2 On/off button
3 Rotation direction change
4 Timer 1/2/4/8 hours
5 Light
6
Airflow mode button
USE AND CARE
• Do not use the appliance if the on/off switch does not
work.
INSTRUCTIONS FOR USE
BEFORE USE
• Please read the “Safety advice and warnings” booklet
carefully before first use.
• To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
• All wiring must be in accordance with the national and
local electrical codes. Electrical installation should be
performed by a qualified electrician.
• Be sure to remove all packaging material from inside the
appliance.
FAN INSTALLATION
• See “FAN INSTALLATION” at the beginning of the
instruction manual. (Steps 1-17).
• This fan can be mounted with a downrod (suspension
tube) on a regular (no-slope or not-vaulted ceiling). Other
installations, such as flush mount, are not available for
this fan.
• IMPORTANT: In the package, you will find the material
for fixing the bracket to the ceiling (Conventional ceiling).
This material is not suitable depending on what type of
roof. If any doubts, ask a professional and use the fixing
that you think is the most suitable.
• IMPORTANT: Do not turn on the ceiling fan if the blades
are not in place or the fan will not work properly.
• Cut off the power before any installation or assembly
operation.
• Take the motor out of the packaging. To avoid damaging
the housing surfaces, mount the motor on a soft surface.
• In order to avoid electric shock, make sure that the power
supply has been previously disconnected.
• The electrical installation must be done in accordance
with national regulations.
• It is recommended that the installation be done by a
professional.
• Install the fan at a minimum distance of 2,50 meters from
the ground or other objects.
• The light of the fan can be connected in two ways. One
way is to control the fan and the light through the remote
control. (See wiring diagram). The other is to control
the light through the wall switch and the fan through the
remote control. This change must be made by a licensed
electrician.
ASSEMBLING THE BATTERY/S OF THE REMOTE
CONTROL
• Caution: During the handling of batteries, do not touch
both poles at the same time, as this will provoke the
partial discharge of the stocked energy, therefore,
affecting longevity.
• Remove the cover of the battery compartment.
• Check that the plastic covering that protects the battery
has been removed (some batteries are sold with a
protective covering).
Downloaded by: pd-oliana on 11-04-2023 15:16 CEST