12
R2 Obstacle detected
R2 Obstacle detected
Obstacle is detected
check sliding doors
Example of “Error notification” R2 Obstacle present.
DIAGNOSTICA INGRESSIINPUTS DIAGNOSTIC
Push
P1 + P2
buttons at the same time to check the status of all sensors installed on the
automatic door. Should a symbol be highlighted, it means that a sensor is on or out of order.
TROUBLESHOOTING
ERROR
DESCRIPTION
ACTION
R1 Test sensors
Failed test sensors
control operation!
Make sure that all test settings and parame-
ters are correct, that the test is actived also
on the safety sensor and that the eletrical
connections between the sensor and the
control board are correct.
R2 Obstacle
detected
Obstacle is detected
check sliding doors
Should the problem persist, remove the ob-
stacle or check whether the leaf runs smo-
othly or not. If necessary, increase the power
values through parameters Power.OP and
Power.CL.
R3 No mains vol-
tage
The automation wor
-
ks in battery
Check magnetothermic switch (upstream of
the system), check fuses;
R4 Unknow state
Automation in time
-
out restore?
The system is automatically restored.
R5 Timeout
Automation in time
-
out restore?
The automation cannot complete the ma
-
noeuvre within the maximum time set. The
system is automatically restored.
R6 MASTER/SLAVE
communication
The double leaf
automation does not
move
Check the MASTER/SLAVE connection
between the two doors.
R7 Wrong
Parameters 1
Value out of range for
complete movement
Set parameters prevent the manoeuvre to
be carried out correctly. Check speed para-
meters and ramps.
R8 Wrong
Parameters 2
Value out of range for
“winter” movement
Set parameters prevent the winter manoeu-
vre to be carried out correctly. Check speed
parameters and ramps.
