2. Factory preset Timings Adjustment:
A. Press shuttle Knob to show OSD window press shuttle Knob again to switch the functional controls.
B. Rotate the shuttle Knob to select the "ZOOM" function, then press the shuttle Knob 10 seconds again. While do not
release the shuttle Knob until the OSD window changed to the Factory preset window.
C. The Factory preset window contains the following functional controls. Select one of the control. Then press the
shuttle knob to adjust its value for the optimum picture.
80
R
G
B
R
G
B
EXIT
FACTORY PRESET
6500
9300
H-SIZE
CB
CORNER BOTTOM
G-GAIN
H-CENTER
V-C LINEARITY
B-GAIN
V-SIZE
V-S LINEARITY
R-BIAS
VS
V-SUB SIZE
ROTATION
G-BIAS
V-CENTER
H-MOIRE REDUCE
G-BIAS
VC
V-SUB CENTER
V-MOIRE REDUCE
9300
COLOR TEMPERATURE
PINCUSHION
DEGAUSS
TRAPEZOID
6500
COLOR TEMPERATURE
PARALLELOGRAM
CONTRAST
RETURN
PIN-BALANCE
BRIGHTNESS
OSD EXIT
CT
CORNER TOP
R-GAIN
D. While the all adjustments are finished, please select the "
EXIT
" function, and press the shuttle knob to Quit the
OSD window.
E. To switches the input signal to the other Timing Mode. Please follow step C ~ D to get the optimum picture.
F. Select the "
" RETURN function and press the shuttle knob, then the Factor Preset window will be returned
to the original OSD window.(user's operation condition)
