5.1 Attach back panel (3) by tightening screw
(D) into the pre-drilled holes of back panel (3).
5.2 Snap in the bushing (F) on the top hole of
panel (3).
3.1 Attach panel (4), (5), (6) onto panel
(2) by aligning each cam bolt to its
corresponding hole.
STEP 5
Tool needed
4.1 Insert cam (B) into holes in panel (4), (5), (6) with
notch on cam facing head of cam bolt (A).
4.2 Tighten cam (B) approximately 1/2 turn clockwise
until snug
4.3 Press cap (C) into cam (B).
STEP 6
CAP
CAM
C
B
NOTCH
1/2 TURN
CLOCKWISE
STEP 4
(OPTION)
THE 5/16" SLOTTED
TOOL HAS THE BEST
RESULT TO TIGHTEN
CAMS.
5/16"
slotted
6.1 After placing refrigerator in cabinet,
remove the protection cardboard.
7
Install this cross bar
ONLY
using hardware (G), (H), (I)
when you install the Tatung
refrigerator model TR-4RD
series into this cabinet.
D
F
3
6
2
STEP 3
4
1
5
