30
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
LTA
Adjustments and operations
In a previously prepared ground you can start making the terrace with the blade a
little more tilted, i.e. with a little more actuation on the cylinder.
In both cases, after the
3rd and 4th passes, gradually
activate the cylinder until the
terrace is completed.
NOTE
When the pass is started the operator must be careful to adjust the blade
cutting depth when the wheel gets into the terrace channel. In case such
detail is not observed, difficulties may arise in cutting and leveling the
terrace, resulting into unevenness throughout it.
Removing terraces
When the purpose is the leveling of an area, and the terrain is yet irregular, blade
cutting depth must be adjusted frequently.
As the terrace loses the waviness, such frequency must be reduced to a point in which
blade adjustment is no longer required.