36
Important
FASTEN ALL THE COMPONENTS PAYING SPECIAL ATTENTION TO THE FOLLOWING
POINTS:
- THE TIGHTENING OF THE NUTS THAT FASTEN THE SEED ROWS IN THE CHASSIS SHOULD
BE MADE GRADUALLY, AVOIDING TO TIGHTEN EACH NUT TOTALLY AT ONCE.
- THE SAME IS VALID BETWEEN A ROW AND ANOTHER; THAT IS TO SAY, DON'T TOTALLY
TIGHTEN AT ONCE A ROW, BUT GRADUALLY.
- INSERTING THESE OPERATIONS OF TIGHTENING THE NUTS OF A ROW AND PASSING
FOR OTHER SHOULD BE MADE BY ROTATING THE HEXAGONAL BARS, TO MAINTAIN
THE CORRECT ALIGNMENT AND TO AVOID BRAKING.
- THE ADJUSTMENT OF THE SET SCREWS WITH BUSHINGS THAT FIX THE HEXAGONAL
BARS, WILL BE MADE AT LAST.
- VERIFY THE CORRECT ALIGNMENT OF THE CHAINS (CARRYING WHEELS TO THE
CLUTCHES)
Procedures for Changing the Row Spacings
7th)
In order to close some fertilizer
metering, fit the detachable cover to the
augers that won't be used.
SET
SET
SET
SET
SET-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS
8th
) In order to work with some raised seed
row units, you need to:
- Remove the whole back portion of the
seed row unit.
- Remove the tension spring.
- Unfasten the front end of the upper rocker
arm.
- Raise the row unit and lock it with the upper
rocker arm according to the illustration.
- In the fertilizer row unit it is enough to remove
the scarifier spindle or the double-disc.
