Tattile GigE TAG-2, Reference Manual

Page: 18 / 20

TAG-2 LINE-scan CAMERA
Installation instructions
Good equipment operation is guaranteed only by respecting the instructions cited in this refer-
ence manual.
TATTILE declines all responsibility for anomalous equipment operation, installed with criteria
not respecting these instructions:
•
TAG-2 cable courses must be kept separate from power cables.
•
Pay attention to the various connections, especially in respect to the correct
polarity of the power-supply cables.
•
Supply the TAG-2 with a dedicated power-supply.
•
Mount the TAG-2 on a stable and vibration-free structure. Connect the TAG-2
chassis to the electrical earth (PE) with the mounting screw on the base of the
camera.
•
The power supply cable must be screened and not longer than necessary.
•
Do not disconnect the camera connector while the power is applied.
•
Supply the main power (+Vpower and +0V) and the I/O power (+VI/O and
GNDI/O) with dedicated power supplies.
Do not supply power to the camera with a DC distribution system. (Max surge
1KV line-earth).
18