© 2020 Tate, Inc.
6
Do not clean your polycarbonate with any unapproved cleaners. When in doubt,
seek guidance. Using scrapers, squeegees, razors or other sharp instruments may
permanently scratch your polycarbonate.
Always avoid dry rubbing/cleaning your polycarbonate, as sand and dust particles
clinging to the exterior of the glazing may scratch its surface.
An Anti-Static Canned-Air Ionizer can reduce electrostatic charge buildup on
polycarbonate, consequently reducing dirt and dust buildup that would hinder
cleaning.
Special Note:
The edges of your polycarbonate sheet are not protected with an abrasion and
chemical resistance hard coating. Do not allow cleaning solutions and solvents to
pool along the edges for any length of time.
Always rinse edges thoroughly with generous amounts of lukewarm clean water.
Removing scratches from polycarbonate sheet/window
Deep scratches and gouges made by sharp objects such as keys, screwdrivers, and
knives cannot be repaired. Fine scratches may be reduced in severity or
cosmetically hidden by using a buffing compound such as NOVUS 2 Plastic Fine
Scratch Remover, followed by a cleaning and polishing agent like NOVUS 1.
