TATA Motors HARRIER, Owner'S Manual

Page: 98 / 267

DASHBOARD AND FEATURES
88
Warning Lamps Color Indicator Remarks
Speed limit warning
indicator
Amber
This lamps comes on when ignition is switched ‘ON’ and goes ‘OFF’ after
4
Seconds.
When the vehicle speed cross
80
kmph, then speed limit warning indicator
turns ‘ON’ along with audio chime for every
2
minute chime (Audible warning).
If vehicle speed crosses
120
kmph, the speed limit warning indicator turns
'ON' along with an audio chime (audio warning) continuously, until the vehicle
speed is above
120
kmph.
If vehicle speed is between
80
kmph and
120
kmph, then the audio chime
(audio warning) will become less frequent but the speed limit warning indi-
cator will remain ‘ON’ continuously. When the vehicle speed is reduced below
80kmph, then the speed limit warning indicator and the audio chime (audio
warning) will turn off.
DPF Lamp
Amber
The lamp blinks constantly to indicate that the DPF needs to eliminate the
trapped pollutants (particulate matter) through the regeneration process, it
therefore does not indicate a malfunction. The lamp remains off during the
entire DPF regeneration and it lamp up only when driving conditions require
the driver to be notified. To switch off the lamp, keep the car running until
regeneration is complete (ideally at 3
rd
gear,
60
kmph. with engine speed over
2000
rpm). The process normally takes about
20
minutes.
Note:
Failure to obey the correct procedure for long distance when the DPF
lamp comes ON can cause the warning lamp (MIL) to come ON. In that case,
please contact nearest TATA authorized service center to restore correct DPF
operation.