Tasslock Defender LED
User Manual
7. Turning off Auto remote: Press and hold
and then
press
12 times, then release both. Indicator light will
flash 12 times for confirmation.
8. Factory Reset: Press and hold
and then press
15
times, then release both. Motorcycle will sound a
confirmation tone on factory reset.
Common Faults and Solutions
Note: If you cannot solve the above faults with the
solutions given. Then contact the Helpline 01715593468
or Contact the Supplier. Try Resetting the Remote first.
DO NOT OPEN THE DEVICE OR REMOTE. IT WILL VOID
YOUR WARRANTY.
WWW.TASSLOCK.COM All Rights Reserved
Fault
Cause and Solution
No response after button press
Low battery or remote broken
Host without response after turn signal flash
Alarm horn wire cut or broken
After start the ignition lock and with right respond after press the
button of controller, the vehicle cannot start
1. Low battery on vehicle or battery wire poor contact. 2.
Solution of the situation Low battery on vehicle or battery wire
poor contact: Start the ignition lock, press the unlock button and
ring unlock tone, but do not press the start button, shift downhill
directly traction to start the engine
Vehicle Cannot start
1. Check the battery.
2. Check the ignition lock, start ignition lock, check whether the
turn signal and indicator of meter is normal, if it is normal,
please check whether the ignition lock is broken or battery fuse
is short circuit
