2
Hardware List
Handle
x 6
M4 x 20mm Bolt x 6
Camlock x 28
Locking pin X 28
M6 x 35 Bolt x 8
Wall strap x 1
M4 x 25mm Self-tapping Screw x 2
Assembly tips
for hardware
Warning
Small parts can present choking hazard.Always keep small parts out of reach of children
both during and after assembly.Store any spare or unused parts in a safe place.
Recheck tightness
Re-tighten all connector bolts(at least two months after assembling the
cot),as some connectors may loosen as the cot settles.Periodically check
all of the connector screws.making sure they are tight.
Screws
We recommend tightening all screws and connectors by hand.If using a
cordless driver,set the speed to a slow setting and the clutch to a low setting
to prevent excessive tightening that may result in damage to your furniture.
M6 x 60 Bolt x 12
Allen key x 1
