Assembly:
STEP 5: With your chest now the right way up, place the top board onto the chest
frame, using M6 x 35mm bolts. Use your Allen Key to secure bolts and do not over-
tighten.
STEP 6: Follow the below set of images, from left to right.
Begin by fitting the locking pins to the drawer side panels.
Following picture 2, fit the camlocks to the rear of the drawer panels.
Following picture 3, insert the draw base between the gaps of the draw side panels.
M6 x 35mm Bolt x 4
Allen Key x 1
Locking Pins x 4
Camlocks x 4
