TasmanEco Europa change table Assembly Instructions Manual Download Page 7

Page: 7 / 8

Fit The Drawer Assembly To The Change Table

Assembly is now complete.

Maintaining Your Change Tray

Align the sliders on the drawer and gently the push the drawer into place.

To remove the drawer, slide it out as far as possible and grip the ends of the black plastic latches on both sides of

the drawer. Gently pull the latches up while at the same time pulling the drawer forward to release.

To clean, wipe down with a soft cloth and soapy water.

Avoid scourers and steel wool as these will damage the finish.

Two months after assembling the change table, re-tighten all connector

bolts as some may loosen as the change table settles.

Summary of Contents for Europa change table

Page 1: ...cycled materials SJC Brands Pty Ltd abn 58 106 988 578 9 Lincoln St MINTO NSW 2566 p o box 5878 MINTO DC NSW 2566 t 02 9603 5000 f 02 9603 7000 e info tasmaneco com au w www tasmaneco com au Save these instructions for future reference Assembly of this furniture is best undertaken by two people TM ...

Page 2: ...x 8 Locakble Castors x 2 Freewheeling Castors x 2 Side Panels x 2 Upper Cross Braces x 2 Top Shelf x 1 Bottom Shelf x 1 Drawer Front Panel x 1 Drawer Left Side Panel x 1 Drawer Right Side Panel x 1 Drawer Rear Panel x 1 Drawer Base x 1 Lower Cross Braces x 2 Allen Key x 1 2 Parts List ...

Page 5: ... grooves on the face of each panel Secure the side panels using two phillips screws on each side Slide the base into position ensuring it is positioned correctly in the grooves on the faces of the panels Note the grooves in the faces of the panels Note the orientation of the side panels with the tab on the metal slider at the front of the side panels ...

Page 6: ...ocking pins to the front panel Tighten the pins firmly using a phillips screwdriver Fit the locking dowels to the side panels Note the positon of the symbols on the dowels The dowels must be fitted so that they are in the open position as shown Connect the front panel to the drawer assembly Tighten the two locking dowels on each side until they stop rotating ...