THIS SIDE UP
THIS SIDE UP
THIS SIDE UP
THIS SIDE UP
TM
Right Bed Head
Base
Front Adjustable Panel
Rear Fixed Panel
Metal Cross Dowels x 4
(Cot/Bassinet)
Glide Pins x 4
Connector Bolts x 8
Double Ended Screws x 4
50mm Guard Screws x 2
Allen Key x 1
Screwdriver x 1
Left Bed Head
2
3
Fit Glide Pins
2
Parts List
Prepare Base
t
Begin by laying the base frame down on the
fl
oor. NOTE: The top of the base
is marked “This Side Up” and must be facing DOWNWARDS for this stage of
assembly.
t
Insert the metal cross dowels into the four holes in the base. The screw heads
must be facing outward so you can use a screwdriver to rotate the dowels,
and align the horizontal holes so they can accept the bolts in the next steps.
1
Fit the glide pins to the four threaded inserts. Tighten
fi
rmly using a
screwdriver,
but do not overtighten
.
DO NOT OVERTIGHTEN
Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people.
Warning
Safety Consideration for your Child.
t
Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised.
t
ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS.
t
DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT.
t
KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM ANY POSITION
IN THE COT. It is advisable to keep all items out of your child’s cot to prevent su
ff
ocation or strangulation.
t
TO PREVENT FALLS, THE BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE YOUR CHILD CAN SIT UP.
t
WHEN CONVERTING THE COT TO A JUNIOR BED, THE SIDE RAILS SHOULD BE INSTALLED TO PREVENT FALLS.
Recommended Mattress Size.
t
This cot has been manufactured for use with a mattress which measures 690mm (wide) x 130 mm (long) x 120 mm (maximum
thickness). The width and length are speci
fi
ed because it is IMPORTANT that the gaps between the mattress and the sides and
ends of the cot
do not exceed 40 mm.
This is to minimise the risk of a child’s limb becoming caught in the gap. The thickness of
the mattress has been speci
fi
ed to ensure that the depth of the cot is greater than 500 mm with the mattress base in the lower
position to minimise the risk of a child climbing or falling out of the cot.
Safety Consideration for Cot.
t
Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles. Regulary
check all of the connecting bolts, making sure they are tight.
t
Regularly check cot for weakness in timber joints and timber panels. If any weaknesses are found, report immediately to
Tasman Essentials on 02 9603 5000
t
Do not use cot if it has been damaged in any way and always use genuine Tasman Essentials parts. Contact your nearest Tasman
Essentials stockist or original place of purchase for spare parts
t
Ensure the dropside mechanism is kept clean and free from foreign objects to ensure its smooth operation
t
Report any fault with the dropside mechanism to Tasman Essentials immediately. See website for details
