TASKING iSYSTEM Infineon TC377TE, User Manual, Page: 7 / 20

Options
Target adaptation
The Emulation Adapter adaptation to a specific target microcontroller pincount and package
is done via a Solder part. Sometimes also an optional Extender is available. The optional
Extender connects between the Emulation Adapter and the matching Solder part, which is
being soldered on the embedded target side.
The available Solder part and the Extender are listed in the table below.
Package (Pitch) MCU Type
Extender (optional)
(Ordering code)
Solder part
(Ordering code)
BGA292
TC327, TC337,
TC367, TC377
BGA IA292LFBGA-EXTENDER IA292LFBGA-SOLDER
BGA Adaptation
Refer to the chapter Assembly for more information about the assembly procedure.
Extender (optional) Solder part