Taski swingo 755, Instructions Of Use, Page: 95 / 198

93
Removing and cleaning the brush
Cleaning the machine
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec
-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal
-
functions.
The required data are provided on the nameplate of your ma
-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Notice:
Clean the brush whenever cleaning work
is completed.
• To lift the tool, push the foot pedal
downwards until it engages.
• Rotate the tool counterclockwise
away from the tool connection using
your foot.
• Clean the tool under running water.
Attention:
Never clean the machine with a high-pres
-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Notice:
The machine must be switched off and the
plug must be removed from the mains
socket.
Notice:
Store the machine with a lifted squeegee,
lifted brush and open tank lid. Thus, the
tank can dry,
and the generation of mold and unpleas
-
ant odors is prevented.
• Lift the tank and turn the dosing aid.
• Lower the tank cover and place it
carefully on the dosing aid.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex
-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity ◊
◊◊
◊◊◊
⊗
Page
Draining and cleaning the recovery and
fresh water tank (Flextank)
● 92
Check the suction filter for contamina
-
tion and clean it
●
Clean all yellow marked parts ●
Clean the brushes ● 93
Clean the squeegee, check the blades
for wear and change them, if necessary ●
92
Wipe the machine using a damp cloth ● 93
Clean the seals of the tank lid, check
them for cracks and replace them, if
necessary
●
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 450 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi
-
cient maintenance, shorter intervals are
required.
EN