13
I25
I24
I23
I22
I21
I20
I19
I18
I17
I16
I15
I14
I13
I12
I11
I10
I9
I8
tr
no
it
fr
es
en
de
Service, maintenance and care
The machine's maintenance is pre-condition for trouble-free running and a long
life.
Service intervals
TASKI machines are built to the highest quality standards. This is supported by
internationally recognised quality control procedures. Electrical and mechanical
parts are subject to wear or aging if used for long periods of time.
Service centre
Should you contact us due to a malfunction or for placing an order, please
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the
address of your nearest TASKI partner can be found on the last page of this
manual.
Blades replacement
Blade on the inner radius.
Blade on the outer radius
Cleaning or replacing the float (Indication for full recovery tank)
Disassembly:
Assembly:
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
◊
= After use,
◊◊
= Every week,
◊◊◊
= Every month,
⊗
= Service light
Activity
◊ ◊◊ ◊◊◊ ⊗
page
Clean all parts marked yellow
Drain and clean the tanks
Wipe down the machine with a damp cloth
Clean the tank lid seal, check for cracks and
replace if necessary
• In order to maintain operational reliability and availability for use, the service
must be carried out after 450 working hours (option: only with installed
operating hours counter) or at least once a year.
Under rough or extreme working conditions and / or insufficient maintenance,
shorter intervals may be necessary.
• Place the clean squeegee unit with the outer radius face down on a solid
surface e.g. table, floor.
• Press one hand onto the squeegee body by the hose connector.
• Grasp the blade with your thumb and forefinger in the middle of the arch and
pull strongly until the metal band clicks open and the blade is released from
the squeegee body.
• Release the metal strap and pull the blade off the squeegee body.
• Clean squeegee (body, metal straps and blades) with a brush.
• Mount the "rotated" or replaced blade onto the squeegee body.
Caution:
Danger of injury from clamping the fingers!
• Lock the metal strap (Check position of mounting slots) into place and press
the centre of it until it ”clicks” into place and presses the blade onto the
squeegee body (Risk of injury).
• Turn the squeegee upside down by placing it on its suction hose connector
and the bumper wheels.
• Loosen the clamping screw of the blade fastener by using an allen key (4).
• Release the metal band and pull the blade off the squeegee body.
• Clean squeegee (body, metal straps and blades) with a brush.
• Mount the "turned" or the new blade on the nozzle body, so the creases
point outward.
• Hook the metal strap into place (Check position of mounting slots) and fix it
with the screwdriver until the blade is pressed onto the squeegee body.
The shape of the blades allow them to be used on all sides before needing
replacement.
• Switch the machine off and pull the power supply cord out of the mains
socket.
• Hold the float and pull it over the lower stopper.
• Clean it with water using a brush (let it dry out well).
• Brush the yellow suction filter with a soft brush
or remove the fluff with a cloth.
The yellow suction filter can be easily removed
(quick-fit seal).
• Hold the float at its small diameter. Push it over
the lower stopper until it clicks into place.
• Check:
-that the float easily moves up and down.
-that the float completely covers (seals) the yellow suction filter.
