Taski Swingo 450B Technical Manual Download Page 52

Page: 52 / 63

Technical Manual

31. May 2007

Revision: V1.10

8-2

09.5 swingo 450B - reco

ended s

are par

ts.fm

- 31. May 20

Recommended spare parts

8.1

General

The parts are classified according to the importance of stocking:

W: Wear and tear parts, basic for machines to run

OM: Ordinary maintenance, needed for regular service visits

without mayor breakdowns

EM: Extraordinary maintenance, needed to overcome breakdowns

of the machine and for regular preventative maintenance

This list does not claim to be complete and is subject to change any

time.

Please, feel free to add or delete parts or change classification

according to your experience.

8.2

Spare Parts

8.2.1 Handle (01)

8.2.2 Tank group (02)

Pos. No.

Ord. No.

Art. No.

Description

Class

Note

108

4021120

4501/102

Microswitch

110

4125007

17450-80

Controllabel

111

4122605

4326/112

Finewire fuse

116

4126576

17451-44

Electronics 450B

120

4126379

17450-82

Bowden Cable

141

4099600

8961/102

Sealing compound

omnivisc

Table 1: Handle

Summary of Contents for Swingo 450B




















































Search results

Summary of Contents for Swingo 450B

Reviews:

Taski Swingo 450B, Technical Manual, Page: 52 / 63

Search results

Summary of Contents for Swingo 450B

Reviews: