TASKalfa 3011i Operation Manual Download Page 244

Page: 244 / 610

5-51

Operation on the Machine > Using Document Boxes

Previewing Documents/Checking Document Details

Select (highlight) a document to preview and then select

[Preview] or [Detail].

Preview the document or check the document details.

The operations available in the preview screen are shown below.

Confirm the document(s) and select [Close].

Selecting a page

When printing, sending, or copying a document within a Custom Box, you can specify any pages at will.
Select [

Page Selection

] in the document list screen of the Custom Box, or [

Select Pages to Process

] in the Preview

screen, to display the page selection screen.
Select the pages you want to work with, and select [

Print

], [

Send

], or [

Copy to Memory

Printing Documents in Custom Box (page 5-55)

Sending Documents in Custom Box (page 5-57)

Moving Documents in Custom Box (page 5-58)

1 Zoom in.

2 Zoom out.

3 When you have zoomed in, you can use these

keys to move the displayed area.

4 Press to select any page of the open document

and print, send or copy to removable memory.

Selecting a page (page 5-51)

5 In multiple-page documents, you can use these

buttons to change pages.

6 In multiple-page documents, you can change

pages by entering the desired page number.

NOTE

The preview display can be controlled by moving your finger(s) on the touch panel.

Original Preview (page 2-20)

1 Displaying the number of pages selected.

2 Selecting more than one document at a time.

3 Highlighting the selected document.

4 Selecting documents by checking checkboxes.

5 Selected pages can be printed, sent, or copied

to custom box.

6 You can specify the pages you want to select by

selecting [

Enter Pages

7 You can specify a range of selection by

selecting [

Select Range

Preview:

No.

1/6

2015101010574501

Status

Size

Resol.

Color

: Full Color

300x300dpi

Select Pages to Process

b0703

100%

File:

1/1

Copy to
Memory

Cancel

Send

Selected Pages:

Status

Select Range

Enter Pages

pages

b020103

1/2

2/2

doc0001820160526224855

Summary of Contents for 3011i



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3011i

Reviews:

Related manuals for 3011i

Brands by name

Popular brands

TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for 3011i

Reviews:

Related manuals for 3011i

Brands by name

Popular brands