manualshive.com logo in svg

Task Force Tips ThunderFog Series, Instructions For Installation, Safe Operation And Maintenance

Share
Download
Task Force Tips ThunderFog Series Instructions For Installation, Safe Operation And Maintenance Download Page 20

©Copyright Task Force Tips LLC  2002 - 2018 

LKF-100 August 2, 2018 Rev19

TASK FORCE TIPS LLC

MADE IN USA • tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

13.0  OPERATION and INSPECTION CHECKLIST

Before each use the nozzle

 must be inspected to this checklist; 

1)  There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, missing, broken or loose 

parts, damaged markings, or other defects)

2)  Debris screen is free of debris
3)  Coupling is tight and leak free
4)  Valve operates freely through full range and regulates fl ow
5)  “OFF” position does fully shut off  and fl ow is stopped
6)  Nozzle fl ow is adequate as indicated by pump pressure and nozzle reaction
7)  Shaper turns freely and adjusts pattern through full range
8)  Shaper turns into full fl ush and out of fl ush with normal fl ow and pressure restored

Before being placed back in service

, nozzles must be inspected to this checklist;

1)  All controls and adjustments are operational
2)  Shut off  valve (if so equipped) closes off  the fl ow completely
3)  There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, missing, broken or 

loose parts, damaged markings, or other defects)

4)  The thread gasket is in good condition
5)  The waterway is clear of obstructions
6)  Nozzle is clean and markings are legible
7)  Coupling is retightened properly
8)  Shaper is set to desired pattern
9)  Shutoff  handle is stored in the OFF position

NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of fi re hose, couplings, nozzles and fi re hose appliances. 
(2013 ed., Section 5.2.2). Quincy, MA: National Fire Protection Agency.

WARNING

Any  nozzle  failing  any  part  of  the  checklist  is  unsafe  for  use  and  must  have  the  problem 
corrected before use or being placed back into service. Operating a nozzle that has failed the 
checklist is a misuse of this equipment.

Summary of Contents for ThunderFog Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands