background image

©Copyright Task Force Tips, Inc. 2016-2017 

LIA-540 September 25, 2017 Rev03

11

10.0  ANSWERS TO YOUR QUESTIONS

We  appreciate  the  opportunity  of  serving  you  and  making  your  job  easier.  If  you  have  any  problems  or  questions,  our  toll-free 
“Hydraulics Hotline”, 800-348-2686, is normally available to you 24 hours a day, 7 days a week.

11.0  WARRANTY

Task Force Tips, Inc., 3701 Industrial Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its LDH 
GATED WYE (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and 
workmanship during the fi ve (5) year period from the date of purchase.
TFT’s obligation under this warranty is specifi cally limited to replacing or repairing the equipment (or its parts) which are shown by 
TFT’s examination to be in a defective condition attributable to TFT. To qualify for this limited warranty, the claimant must return the 
equipment to TFT, at 3701 Industrial Way, Valparaiso, Indiana 46383-9327 USA, within a reasonable time after discovery of the 
defect. TFT will examine the equipment.  If TFT determines that there is a defect attributable to it, TFT will correct the problem within 
a reasonable time.  If the equipment is covered by this limited warranty, TFT will assume the expenses of repair.
If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT may elect to 
refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its obligations under this limited 
warranty. If TFT makes this election, claimant shall return the equipment to TFT free and clear of any liens and encumbrances.
This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person who is 
an intended or unintended benefi ciary of the equipment, shall not be entitled to recover from TFT any consequential or incidental 
damages for injury to person and/or property resulting from any defective equipment manufactured or assembled by TFT. It is agreed 
and understood that the price stated for the equipment is in part consideration for limiting TFT’s liability. Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including failure to 
provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or altered by someone 
else.
THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE EQUIPMENT ALL 
IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. 
THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT STATED IN THIS DOCUMENT.
This limited warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

8.0  RECORDS

A record of testing and repairs must be maintained from the time the nozzle is purchased until it is discarded. Each TFT nozzle is 
engraved with a unique serial number which, if so desired, can be used to identify nozzle for documentation purposes.

The following information, if applicable, must be included on the test record for each nozzle:

1. Assigned 

identifi cation number

2. Manufacturer

3.  Product or model designation

4. Vendor

5. Warranty

6.  Hose connection size

7.  Maximum operating pressure

8.  Flow rate or range

9.  Date received and date put in service

10.  Date of each service test and service test results

11.  Damage and repairs, including who made the repairs and the cost of repair parts

12.  Reason removed from service

NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of fi re hose, couplings, nozzles and fi re hose appliances. (2013 
ed., Section 5.5.4). Quincy, MA: National Fire Protection Agency.

9.0  REPAIR

Factory service is available with repair time seldom exceeding one day in our facility. Factory serviced appliances are repaired by 
experienced technicians to original specifi cations, fully tested and promptly returned. Repair charges for non-warranty items are 
minimal. Any returns should include a note as to the nature of the problem and whom to reach in case of questions.
Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability 
for damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at www.tft.com 
for parts lists, exploded views, test procedures and troubleshooting guides.
For additional information on care, maintenance and testing, refer to: NFPA 1962: Standard for the Care, Use, Inspection, Service 
Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances, 2013 Edition

CAUTION

Any alterations to the nozzle and its markings could diminish safety and constitutes a misuse 
of this product.

Summary of Contents for LDH GATED WYE













Reviews: