1)
2)
3)
4)
Make certain the valve to the deck gun is closed.
Lift the slide bar on the Extend-A-Gun latch mechanism with one hand and lift the deck gun straight up
with your other hand. The slide bar should be released after the deck gun has moved out of the retracted
position. Notice the word "UNLOCKED" appear on the top surface of the pawls.
When the deck gun is in the extended position it will not be possible to lift it any higher. The pawls will
retract, the slide bar will move down flush with the housing and the word "UNLOCKED" is no longer
visible.
Make certain that the pawls are flush with the sides of the housing and that the word "UNLOCKED" is not
visible before operating the valve to the deck gun.
1)
2)
3)
4)
Make certain the valve to the deck gun is closed.
Lift the deck gun slightly with one hand to take the weight off the latch mechanism and lift the slide bar
with your other hand. Notice the word "UNLOCKED" appears on the top surface of the pawls.
Lower the deck gun to the retracted position. The slide bar should be released after the deck gun leaves
the extended position.
Make certain that both pawls are flush with the sides of the housing and that the word "UNLOCKED" is
not visible before opening the valve to the deck gun.
The Extend-A-Gun has a built in switch to control an indicator light on the truck dash board showing that the Extend-
A-Gun is in the the extended position. This is to help prevent damage that would occur if the deck gun hits a low
overhanging object..
Do not move the truck with the Extend-A-Gun in the extended position.
9
8.1 EXTEND
8.2 RETRACT
8.3 INDICATOR LIGHT
© Copyright Task Force Tips, Inc. 2002-2008
