Task Force Tips EF1 RC MONITOR Instructions For Installation, Safe Operation And Maintenance Download Page 1

Page: 1 / 16

©Copyright Task Force Tips, Inc. 2017

LIY-210 December 4, 2017 Rev00

MANUAL: EF1 RC MONITOR

INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE

DANGER

Understand manual and documents in additional literature before use. Operation of this device

without understanding the manual and receiving proper training is a misuse of this equipment.

Obtain safety information at www.tft com/serial-number

This instruction manual is intended to familiarize firefighters and maintenance personnel with the operation, servicing and safety

procedures associated with the EF1 RC Monitor series.
This manual should be kept available to all operating and maintenance personnel.

TASK FORCE TIPS, INC.

MADE IN USA • www.tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

Y1165

SERIAL# www

.tft.com-Y

123456

219-462-6161 • www

.tft.com • MADE IN USA

ef1 rc

MODEL#

See Section 3.2.2 for

Flow/Pressure

Operating Envelope

Summary of Contents for EF1 RC MONITOR

















Search results

Summary of Contents for EF1 RC MONITOR

Reviews:

Related manuals for EF1 RC MONITOR

Brands by name

Popular brands

Task Force Tips EF1 RC MONITOR, Instructions For Installation, Safe Operation And Maintenance

Search results

Summary of Contents for EF1 RC MONITOR

Reviews:

Related manuals for EF1 RC MONITOR

Brands by name

Popular brands