manualshive.com logo in svg

Task Force Tips EDUCTOR 125 Series, Manual For Safe Operation And Maintenance

Share
Download
Task Force Tips EDUCTOR 125 Series Manual For Safe Operation And Maintenance Download Page 1

©Copyright Task Force Tips, Inc. 2004 - 2017 

LIU-330 November 16, 2017 Rev08

MANUAL: 
EDUCTOR 125 SERIES IN-LINE

MANUAL FOR SAFE OPERATION AND MAINTENANCE

WARNING

Read instruction manual before use. Operation of this device without understanding the manual 
and  receiving  proper  training  is  a  misuse  of  this  equipment.  Users  who  have  not  read  and 
understood all operating and safety instructions are not qualifi ed to operate this eductor. This 
instruction  manual  is  intended  to  familiarize  fi refi ghters  and  maintenance  personnel  with  the 
operation, servicing, and safety procedures associated with the eductor. This manual should be 
kept available to all operating and maintenance personnel.

TASK FORCE TIPS, INC.

MADE IN USA • www.tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

Inlet Pressure:

200 psi (13.8 bar)

160 psi (11 bar)

145 psi (10 bar)

Concentration Settings

Off ,  1/4%,  1/2%,  1%,  3%,  6%

Models: 

60 gpm (225 l/min) 
95 gpm (360 l/min)

120 gpm (450 l/min)
125 gpm (475 l/min)

Maximum

Back Pressure:

130 psi (9 bar)

100 psi (6.9 bar)

95 psi (6.5 bar)

Summary of Contents for EDUCTOR 125 Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands