manualshive.com logo in svg

Task Force Tips CrewProtect LIC-300, Instructions For Installation, Operation And Maintenance

Share
Download
Task Force Tips CrewProtect LIC-300 Instructions For Installation, Operation And Maintenance Download Page 5

©Copyright Task Force Tips LLC 2021-2022

5

LIC-300 May 9, 2022 Rev02

3.3 WIRING

The CrewProtect is wired to the truck electrical system,  allowing continuous decontamination of  cabin  air while  the truck is actively

powered. Use the provided wiring diagram to ensure proper wiring.

 

Figure 3.3

4.0 OPERATION

Because the CrewProtect is wired directly to the truck electrical system, continuous air decontamination occurs the entire time the truck

is actively powered.
Regular cartridge replacement ensures optimal air decontamination. See section 6.0 on page 7 for cartridge lifecycle and replacement

instructions.

 

NOTICE

Always disconnect power before installing or servicing electrical components. Failure to do so 

could cause damage to the circuit boards. 

Internal

Pigtails

Requirements:
Minimum Wire Gauge - 18 AWG

Minimum Fuse 
12V system - 6A slow blow fuse
24V system - 4A slow blow fuse

12V/24V

(fuse)

Summary of Contents for CrewProtect LIC-300









Reviews:

No comments

Brands by name

Popular brands

Load more brands