7
4. Press the
SELECT
button again to lock in the code. The light should flash 3 times. The VCR
function will now operate per the selected device code without any learned buttons. Individual
buttons cannot be erased.
SPECIAL FEATURES
The Imperium Remote Control has a number of special features:
Punch Through
Punch Through allows TVs, VCRs, and cable box controls to work at the same time. For
example, after you press the
SAT
or
VCR
button, the volume controls would still work with the
television. Other functions may also work this way.
Availability of this feature varies depending
on the type of TV, VCR, and cable box you are using.
Read Back Programmed Code
The remote control can read back the codes selected for TV, VCR, and cable box so you can
write them down for future reference. To do this:
1. Press the device key for which you want the code read back. For example, if you want to get
the code for your TV, press the
TV
key.
2. Press
SELECT
. The light should flash twice.
3. Press
1
and then
SELECT
. The light will flash the number of the first digit of the code. For
instance, if the TV’s code is 567, the light will flash five times. If a digit of the code is zero,
the light will not flash.
4. Repeat steps 2 & 3 to get the second and third digits of the TV code, by pressing
2
and
SELECT
for the second digit (for code “567,” the light flashes six times) and
3
and
SELECT
for the third digit (light flashes seven times). This procedure can then be repeated
for the VCR and cable box.
Substitute Devices
You may “substitute” devices with your remote control. For example, if you have two
televisions, you may program the second television on another device button such as DVD. All
of the device buttons (TV, VCR, SAT, DVD, CD, AMP) can be programmed as a TV, VCR, or
cable box, etc. Note, however, that a second TV that is programmed to a different Imperium
200H menu device (i.e., DVD) may/will have device functions which do not exactly align with
the menu. To program a TV on the DVD device button:
