Page
10
of
22
Chapter 3: Recording with the Axon Mic
Operating Modes
The Axon Mic has 2 operating modes:
1
BUFFERING (turning on the device and starting pre-event buffering)
2
EVENT (event recording)
BUFFERING Mode (Turning on the Microphone)
•
Move the ON/OFF switch on the Axon Mic to the ON position.
With the microphone turned on, the Axon system is in the BUFFERING mode. When
BUFFERING begins:
•
The Operation LED on the Axon Mic will blink green.
•
By default, audio in the BUFFERING mode is OFF.
•
The Mic will not be capturing anything unless the agency has configured “audio in
buffer” ON, and will not record to permanent memory while in BUFFERING mode.
•
When configured at the agency level to be ON, buffered audio duration is 30 seconds by
default (00:00:30).
When you activate the EVENT mode, the buffered audio (if this feature is enabled at the
agency level) captured directly before the event, up to 30 seconds, will be saved and
attached to the event in permanent memory. This feature is intended to capture the audio
of an incident just before your activation of EVENT mode.
With default settings, the system does not capture audio in BUFFERING mode, so
anything recorded in that mode will be video-only. Buffering mode starts only after
Summary of Contents for Axon Mic AX1004
Page 9: ...Page 9 of 22 ...
