6
TASCAM US-1x2
3 – Installation
5.
When the Install Shield Wizard screen appears, click the
“Next”
button.
6.
Read the contents of the License Agreement, and select
“I accept the agreement”
if you agree to the terms. Then,
click the
“Next”
button.
7.
Next, click the “
Install
” button.
8.
Start installation.
9.
The following screen appears when installation has com-
pleted.
Click the
“Finish”
button.
This quits the installer and launches the Windows Settings
Panel.
NOTE
The first time you connect the unit by USB to the computer
after installing the software, installation of the device driver
will be executed. Some time might be necessary before the
unit is recognized because Windows Update will be automat-
ically searched at this time. If the unit is still not recognized
after a while, open the software installation screen from the
notification area at the bottom right of the computer display,
and click
“Skip obtaining driver software from Windows Up-
date”
to stop the search.
Installing the Mac dedicated software
NOTE
i
Install the Mac dedicated software on the computer before
connecting the unit to it with the USB cable.
i
Depending on the Gatekeeper setting, a warning message
might appear during installation. See “Working with Gate-
keeper” on page 7 for information about Gatekeeper.
Mac dedicated software installation procedures
1.
Download the latest Mac dedicated software for the operat-
ing system you are using from the TEAC Global Site (http://
teac-global.com/) and save it on the computer to be used
with the unit.
2.
Double-click “
TASCAM_US-1x2_Installer_x.xx.dmg
”, which
is the saved disk image file for the Mac dedicated software,
and double-click
“US-1x2_Installer.pkg”
inside the folder
that opens.
NOTE
Depending on the computer’s settings, the downloaded zip
file might not have been uncompressed automatically. In this
case, uncompress the zip file first and then double-click the
disk image file.
3.
When the installer starts, click the
“Continue”
button.
