TASCAM US-125M
13
7 To adjust the output level, use the OUTPUT knob on the front of this interface,
as well as the
Levels
tab of the computer
Speakers Properties
control panel.
This adjusts the output levels of both the LINE OUT and PHONES jacks.
Open the
Playback
tab of the
Sound
Control Panel, and then click
Properties
at the
bottom right of the window.
Click the
Levels
tab of the
Speakers Properties
window.
Set the level for
Speakers
to the maximum. Then, click
OK
at the bottom of the
windows to close them.
Windows XP
1 Quit all applications, and open the
Control Panel
from the
start
menu.
2 Open the
Sounds and Audio Devices
panel.
NOTE
If you do not see the above panel, click
Sounds, Speech, and Audio Devices
and then
select the
Sounds and Audio Devices
panel.
3 Click the
Audio
tab, and set the
Default device
under both
Sound playback
and
Sound recording
to
USB Audio CODEC
.
4 To adjust the input levels, use the input knobs (MIC, INST, LINE and COMPUTER)
on the front of the interface. Adjust them so that the OL (overload) indicator
does not light.
When the LIMITER button is ON, it can prevent distortion from sudden loud mic
input signals.
Overload indicator
4 – Settings
