37
you release the mouse, the transport locates to that spot —
without springing back to your point of
origin like a rubber band.
13.
In Event mode, double-clicking an audio event in the top portion of the Track screen
automatically opens that track in the Waveform tab below
This also applies to MIDI events, only instead of launching the Waveform Tab it launches the Piano
Roll tab instead.
14.
The displayed track in the waveform tab follows a selection made in the top of the screen
If the waveform tab is open, a selection made in the top half of the screen will cause the view in the tab
below to change accordingly. For instance, if track seven were selected in the waveform tab, dragging
a selection with the Region tool in track five would cause the waveform tab to change the display to
track five.
15.
Sample accurate waveform editing —
de-clicking
With version 1.5, the SX-1 is able to use the pencil tool on audio waveforms. This is a very effective
way to get rid of clicks and pops caused by clock irregularities, wet-mouthed vocalists and the cat
bumping the mic stand.
Here s how it works:
Select the pencil tool
Select the Waveform tab view on the bottom half of the Track screen. Using whichever method you
desire, horizontally zoom in
as far as the view will go,
as this is required for pencil-tool editing on
audio waveforms
(however, note that pencil edits can be performed at any
vertical
zoom level).
Find a transient in the audio track you ve selected that s relatively loud —
or at least one that has a
shape that is not flat —
our example uses a click from digital clock glitch.
