6 – Modules
w
FREQ
This adjusts the KEY IN FILTER frequency.
Range: 20 Hz - 20 kHz (default: 20 Hz)
When the selection frame is shown, turn LCD knob 7 (lit light
blue) to adjust it.
e
Dynamics parameters
These show COMP/DUCKER parameters and can be used to
adjust them.
When a selection frame is shown, use the corresponding LCD
knobs and buttons to change settings.
r
DYNAMICS TYPE button
o
This shows the name of the currently selected dynamics
type. (Default: COMP)
o
Tap this area to open the type selection menu.
Options: COMP (default), DUCKER
Dynamics parameters
NOTE
Use the corresponding LCD knobs and buttons to change the
settings. They can also be adjusted by dragging the green
and blue
and
icons on the graph.
COMP
Parameter name Range
default
THRESHOLD
-49 dB - 0 dB
-10 dB
RATIO
1.00:1 - ∞:1
2.50:1
KNEE
HARD, HARD MID,
MID, SOFT MID, SOFT,
SMOOTH
CH 1-40: MID
MIX 1-22, MAIN L/R:
SMOOTH
ATTACK
0.1 ms - 125 ms
30 ms
RELEASE
5 ms - 5.00 s
230 ms
OUTPUT GAIN
0 dB - +20 dB
0 dB
AUTO MAKEUP
OFF, ON
OFF
DUCKER
Parameter name Range
default
THRESHOLD
-30 dB, -24 dB, -18 dB, -12 dB,
-6 dB
-18 dB
ATTENUATE
-∞, -24 dB, -18 dB, -12 dB, -9 dB,
-6 dB, -3 dB
-18 dB
HOLD
0.1 sec, 0.5 sec, 1.0 sec, 1.5 sec,
2.0 sec, 2.5 sec, 3.0 sec, 3.5 sec,
4.0 sec, 4.5 sec, 5.0 sec
2.5 sec
100
TASCAM Sonicview 16/Sonicview 24
