4 − Playback operations
Time display switching
When the TIME key on the front panel or the remote control is
pressed, the time display will switch through several modes on
the display.
o
Elapsed track time (no display light indication)
o
Remaining track time (“REMAIN” is lit in the display)
o
Elapsed disc time (“TOTAL” is lit in the display)
o
Remaining disc time (“TOTAL” and “REMAIN” are lit in the
display)
When stopped, the total recording time is shown, regardless of
the status of the TOTAL and REMAIN indicators.
NOTE
In program mode, pressing the TIME key displays the elapsed
and the remaining time of the whole program.
When playing an MP3 disc, elapsed track time is always
displayed, and the TIME key cannot be used.
For details on time display during recording, please refer to
“Time display while recording” on page 24.
Even when power is turned off, the time display mode setting
is retained.
Timer playback
By using an external timer, you can set the CD-RW900SX to play
the loaded disc automatically when the unit is turned on by the
timer.
1.
First, plug the power cord of the CD-RW900SX into the
power outlet of the timer.
2.
Load a disc into the unit.
3.
Switch the TIMER switch on PLAY to enable timer function
on for the desired deck.
When Timer playback has been turned on, the timer icon
lights up in the display.
Timer indicator
NOTE
The indicator flashes when a disc is not loaded into the unit.
4.
Set the timer to the desired time. Consult the timer’s
operation manual for details. At the set time, the power
to the CD-RW900SX will be turned on, and playback will
automatically begin.
Repeat playback
1.
Press the REPEAT key to turn on the repeat mode.
In this mode, all the tracks on the disc are played
continuously. The display shows “Repeat ON” and the
indicator lights up “REPEAT”.
During playback, if the repeat mode is turned on, playback
continues as before, and when the last track finishes,
playback resumes from the first track.
If the repeat mode is turned on when the deck is stopped,
press the PLAY key to begin operation.
2.
Press the REPEAT key again to turn off repeat mode. Repeat
OFF appears then the REPEAT indicator turns off.
NOTE
Combining the repeat mode with the program, Single-
track playback and Random playback functions will enable
Program repeat, Single-track repeat and Random repeat
operations, respectively.
Settings for the repeat playback mode remain after power
is turned off, except the specified A-B section. (see “A to B
A to B repeat playback
If a specific portion between two points on the disc is specified,
that portion can be played back repeatedly.
1.
During playback, press the A-B key on the remote control at
the beginning of the desired portion on the disc.
The REPEAT indicator lights up in the display and the A-
indicator will flash.
2.
At the end of the desired portion on the disc, press the A-B
key again.
Then, the REPEAT and A-B indicators light up in the display,
and the desired A-B section will be played back repeatedly.
NOTE
You can also operate this function during playback standby.
3.
To cancel the A-B repeat mode and resume normal
playback, press the A-B key once again.
The REPEAT and A-B indicators will turn off.
NOTE
A-B repeat cannot be used when the specified A-B section
spans more than one track, and cannot be used with MP3
discs.
When the STOP key is pressed, the specified A-B section is
cancelled.
20
TASCAM CD-RW900SX
