2 − Features of the CD-RW900SX
Front panel
1
POWER switch
The power switch is used to switch the unit on and off.
2
Disc insertion slot
Insert CDs here.
After a disc is inserted part way, it will automatically be
pulled in.
3
Disc force ejection (emergency) hole
If pressing the EJECT key does not eject the disc because the
CD drive is not functioning, for example, use this to force the
disc to eject. (see “Force disc ejection” on page 12)
ATTENTION
Only use this in an emergency. Turn the unit off before using
it.
4
MENU key
Use this key to call up the menu options. (see “Operation
5
EJECT key
Use this key to eject the currently loaded disc.
The display shows “Disc Eject”.
6
REPEAT key
Use this key to set the repeat playback mode on and off.
7
ESCAPE key
When in a menu mode, this key cancels the menu item
selected.
8
DISPLAY key
Use this key to see the current disc title when the disc is
stopped. When the disc is playing or in ready mode, press this
key to see the current track title.
9
TIME key
Use this key to cycle through the time modes shown on the
display. (see “Time display switching” on page 20)
0
REMOTE SENSOR
This is the sensor for the remote control unit. Make sure
that there is a clear path from the remote control unit to the
sensor.
q
Display
The display is used to show the current status of the unit, as
well as the current menu settings.
w
TIMER switch (PLAY, OFF)
Using this key switches Timer play on and off. See “Timer
playback” on page 20 for details.
e
INPUT (L,R) controls
Use these concentric controls to adjust the level of the
analog audio signals received at the ANALOG IN jacks.
r
PHONES jack and the level control
Use a standard pair of stereo headphones, equipped with a
1/4-inch plug, with this jack.
Adjust the volume from the jack with the level control (turn
clockwise for higher volume).
t
MULTI JOG dial
Use this dial to select tracks for playback, to set parameter
values.
In addition, pushing the dial acts like an ENTER key, i.e. the
currently-displayed value or setting is confirmed.
y
FINALIZE/INS key
Use this key to finalize recordable discs. (see “Finalizing” on
page 27)
It also acts like a space key when entering TEXT data. (see
“Title input operation” on page 29)
u
ERASE/DEL key
Use this key (with CD-RW discs only) to erase tracks, or
a whole disc, or to refresh a “bad” disc, or to unfinalize a
finalized disc. (see “Erasing” on page 28)
It also acts like a delete key when entering TEXT data. (see
“Title input operation” on page 29)
i
m
/
h
key
Use this key to operate review playback (search) while in
playback or ready modes.
When Directory search is on, and when stopped, using this
key selects the directory.
This key also moves the cursor in the left direction when
entering TEXT data.
o
,
/
y
key
Use this key to operate cue playback (search) while in
playback or ready modes.
When Directory search is on, and when stopped, using this
key selects the directory.
This key also moves the cursor in the right direction when
entering TEXT data.
TASCAM CD-RW900SX
11
