Rear panel
4
TASCAM 788 Brief Guide
b
REPEAT key and indicator
Used to set
and show the status of repeat playback and recording,
as well as to set the gap between repeats.
c
JOG indicator
Lights when jog (trim) mode
is in operation, as set by the
STOP
+
PLAY
key combi-
nation.
d
PITCH/SSA key and indicator
Used to
set and display the status of varispeed (pitch control)
as well as the SSA (Slow Speed Audition) function.
e
ENTER/YES key
Used to “go down a level”
in the menu system, to confirm settings, or to give a
positive answer to questions asked by the 788.
f
EXIT/NO key
Used to “go up a level” in the
menu system, to exit without making settings, or to
give a negative answer to questions asked by the 788.
g
REW key
Used to move the playback position
backwards in the song. Also used with
STOP
to
locate to the zero point.
h
F FWD key
Used to move the playback posi-
tion forwards in the song. Also used with
STOP
to
locate to the last recording position.
i
STOP key
Stops playback, recording or
“winding”. Used with
PLAY
for jog mode.
j
PLAY key
Starts playback. Uses with
RECORD
for recording.
k
RECORD key
Use with
PLAY
for recording.
l
Cursor keys
Used to navigate around menu
and parameter setting screens to highlight parame-
ters, options, etc.
Rear panel
m
PHONES jack
Used with standard stereo
headphones (1/4” jack).
n
REMOTE jack
1/4” jack used with a foot-
switch such as the TASCAM RC-30P for hands-free
punch operations.
o
AUX OUTPUT jacks
Output unbalanced
signals from the Aux loop at –10 dBV. Connect to the
L
output only for mono.
p
MONITOR OUTPUT jacks
Output the
selected monitor signals. RCA (phono) jacks at a
level of –10 dBV.
q
STEREO OUTPUT jacks
Output the
mixed stereo signals. RCA (phono) jacks at a level of
–10 dBV.
r
AUX INPUT jacks
Accept –10 dBV unbal-
anced signals (1/4” jacks) to the Aux input channels
for assignment to mixer channels or the sub-mixer.
s
MIC/GUITAR switch
Switches the input
impedance of
INPUT D
between MIC/LINE (
MIC
)
and a value suitable for electric guitars, basses, etc.
(
GUITAR
).
t
INPUTS A through D
Accept –50 dBu to
+4 dBu balanced signals. Use the supplied XLR-to-
phone convertors to connect XLR-equipped sources.
u
DIGITAL OUTPUT
Outputs the mixed ste-
reo signals in digital audio IEC60958 TYPE II
(SPDIF) format from a coaxial RCA connector.
v
SCSI connector
SCSI-2 connector for con-
nection of external storage devices, CD-R drives, etc.
w
MIDI IN and OUT
Accept and transmit
MIDI information as described in the manuals.
x
POWER IN
Connect this only to a PS-P788
power supply unit where the voltage requirements
match your local power supply.
y
POWER switch
Press to turn on, and press
again to turn off after shutting down the 788 using
the
EJECT/SHUT
key
F
as described in the
manuals.
TEAC CORPORATION
Phone: (0422) 52-5082
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan
u
v
w
x
y
n
o
p
q
r
t
m
s
Printed in Taiwan MA-0407
