Tascam PA-R100, Instruction Manual

Page: 49 / 96

Advanced Operations
En-49
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2
, you must assign “ IN2 ” to
the “ BD/DVD ” input selector.
Here are the default assignments.
■
BD/DVD , CBL/SAT , GAME , PC , AUX , TV/CD ,
EXTRA1 , EXTRA2
`
IN1 , IN2 :
Select the input to which the component has been
connected.
`
- - - - - :
Output composite video sources from the HDMI
output. The upconverted output from HDMI depends
on the assignment of “
Composite Video Input ”.
Tip
• “ EXTRA1 ” and “ EXTRA2 ” can be selected as input sources in
“ Input ” of “ Quick Setup ” (
➔
page 43 ).
Composite Video Input
If you connect a component to a composite video input,
you must assign that input to an input selector.
If you switch the input to “
TV/CD ” with its default
assignment, the audio of “ TV/CD ” is output while the
video of the previously-selected source is displayed.
Here are the default assignments.
■
BD/DVD , CBL/SAT , GAME , PC , TV/CD , EXTRA1 ,
EXTRA2
`
IN1 , IN2 , IN3 , IN4 :
Select the input to which the component has been
connected.
`
- - - - - :
The composite video is not input.
Tip
• “ EXTRA1 ” and “ EXTRA2 ” can be selected as input sources in
“ Input ” of “ Quick Setup ” (
➔
page 43
).
Note
• Using these inputs as audio-exclusive allows you to enjoy audio
and video from separate inputs. Refer to “Playing Audio and
Video from Separate Sources” for details (
➔
page 31 ).
• “ AUX ” is fixed to the “ - - - - - ” option.
• “ USB ” is used only for input from the front panel.
Digital Audio Input
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the
OPTICAL IN 1
, you
must assign “ OPTICAL1 ” to the “ TV/CD ” input selector.
Here are the default assignments.
■
BD/DVD , CBL/SAT , GAME , PC , AUX , TV/CD ,
EXTRA1 , EXTRA2
`
COAXIAL1 , COAXIAL2 , OPTICAL1 ,
OPTICAL2 :
Select the input to which the component has been
connected.
`
- - - - - :
Select if the component is connected to an analog
audio input.
Tip
• “ EXTRA1 ” and “ EXTRA2 ” can be selected as input sources in
“ Input ” of “ Quick Setup ” (
➔
page 43 ).
Note
• When an HDMI IN is assigned to an input selector in
“ HDMI Input ” (
➔
page 48 ), the same HDMI IN will be set as
a priority in this assignment. In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “
Audio Selector ” (
➔
page 57 ).
• Supported sampling rates for PCM signals (stereo/mono) from a
digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16,
20, 24 bit.
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
GAME - - - - -
PC - - - - -
AUX - - - - -
TV/CD - - - - -
EXTRA1 - - - - -
EXTRA2 - - - - -
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
GAME IN3
PC IN4
AUX - - - - - (Fixed)
TV/CD - - - - -
EXTRA1 - - - - -
EXTRA2 - - - - -
Input selector Default assignment
BD/DVD COAXIAL1
CBL/SAT COAXIAL2
GAME OPTICAL1
PC - - - - -
AUX - - - - -
TV/CD OPTICAL2
EXTRA1 - - - - -
EXTRA2 - - - - -