CONNECTING THE MX-2424
Following is a listing/description of cables required to make connections to the MX-2424. Please note that while
some cables look similar in appearance they may be wired/constructed very differently. Always use the correct
cable!
[53]
Analog Multi-Track Connections
To connect the inputs/outputs of an analog device with balanced DB25 connectors to the analog inputs/outputs of
the IF-AN24 if installed in the MX-2424 (NOTE: This is not a TDIF or AES/EBU cable.):
CU/SD103
DB25(M) – DB25(M)
3 Meters
CU/SD105
DB25(M) – DB25(M)
5 Meters
⇒
8 Channels, input
or
output per cable
To connect the outputs of the IF-AN24 if installed in the MX-2424 to the inputs of an analog device with XLR
connectors:
CU/SD203
DB25(M) – XLR(M)
3 Meters
CU/SD205
DB25(M) – XLR(M)
5 Meters
⇒
8 Channels per cable
To connect the outputs of an analog device with XLR connectors to the inputs of the IF-AN24 if installed in the
MX-2424:
CU/SD303
DB25(F) – XLR(F)
3 Meters
CU/SD303
DB25(F) – XLR(F)
5 Meters
⇒
8 Channels per cable
To connect the inputs/outputs of an analog device with balanced ¼” TRS connectors to the analog inputs/outputs of
the IF-AN24 if installed in the MX-2424:
CU/SD403
DB25(M) – ¼” TRS(M) 3 Meters
CU/SD405
DB25(M) – ¼” TRS(M) 5 Meters
⇒
8 Channels, input
or
output per cable
